BUE2D – "Idle Air Control Configuration"

Offset1218 (0x04c2)
Size1 Byte


Idle air control setup


0Enable IAC PID control
1Use IAC run pos. table above idle
2Clutch or neutral required for IAC active
3Enable start only when IAC pos. is above minimum start position
4IAC run pos. is offset added to avg. IAC
5IAC start pos. value is offset added to avg. IAC
6Use setpoint map (otherwise use setpoint table)
7IAC feature enabled

For variables that have a scaling factor and/or a translational offset given, use this formula to calculate the output value:
output_value = (EEPROM_value * scale) + translate

Please double-check all information from this site before using them!